A warning light on the dashboard can be anything from a reminder that your tires need air to a sign that the engine is about to be seriously damaged. Knowing the difference saves money and keeps you safe. The single most useful thing to understand is the color code, and then a handful of lights you should never ignore.
Start with the color
Most manufacturers follow a similar traffic-light system:
- Red: a potentially serious problem or safety issue. Find a safe place to stop as soon as possible and investigate.
- Amber or yellow: something needs attention soon, but it is usually not an emergency. Get it checked.
- Green or blue: information only, telling you a system is on (headlights, high beams, cruise control).
Symbols and colors vary between brands, so always confirm with your owner’s manual. Most manuals are also available free online.
Red lights: stop safely and check
Oil pressure (oil can symbol)
This means the engine has lost oil pressure. Without oil pressure, the engine can be badly damaged within minutes. Pull over safely, turn off the engine and check the oil level. Do not keep driving with this light on, even if topping up the oil seems to fix it; have the cause found.
Engine temperature (thermometer symbol)
The engine is overheating. Pull over and turn the engine off. Do not open the radiator or coolant cap while the engine is hot: the coolant is under pressure and can cause severe burns. Let it cool, then check the coolant level. Overheating can be caused by low coolant, a leak, a failed fan or a faulty thermostat or water pump.
Brake system (circle with “!” or “BRAKE”)
First check that the parking brake is fully released. If the light stays on, it can mean low brake fluid or a fault in the brake system. Brakes are critical, so have the car checked before driving further. Low fluid is often linked to worn pads or a leak.
Battery / charging system (battery symbol)
The charging system is not working properly, often because of the alternator or its drive belt. The car is now running on battery power alone and may stop when the battery runs flat. Turn off unnecessary electrical loads and head straight to a safe place or a repair shop.
Amber lights: check soon
Check engine light (engine outline)
The check engine light means the engine computer has detected a fault, often related to emissions. Causes range from a loose gas cap to a failing oxygen sensor or misfire.
- Steady light: not usually an emergency, but get the fault codes read soon. Many auto parts stores read codes for free, and a basic OBD-II scanner is inexpensive.
- Flashing light: treat it as urgent. A flashing check engine light usually means a severe misfire, which can send unburned fuel into the exhaust and overheat the catalytic converter, an expensive part. Reduce speed and stop as soon as it is safe, and have the car checked before driving far.
Tire pressure (horseshoe with “!”)
One or more tires is significantly underinflated. Check all four with a gauge when the tires are cold and inflate to the figure on the driver’s door jamb. Cold weather often triggers this light because pressure drops as temperature falls. If one tire keeps losing air, it may have a puncture.
ABS
The anti-lock braking system has a fault. Normal braking usually still works, but the anti-lock function may not, so brake gently and leave extra distance until it is repaired. If the ABS and red brake lights come on together, have the car checked right away.
Traction or stability control (car with wavy lines)
A flashing light while driving usually means the system is working to control wheelspin, which is a cue to slow down. If it stays on, the system may be switched off or have a fault.
Airbag (seated person with a circle)
The airbag system has a fault and the airbags may not deploy in a crash. This is a safety issue; get it inspected promptly.
A quick tip at startup
When you turn the ignition on, most warning lights illuminate briefly as a bulb check and then go out once the engine starts. A warning light that never lights up at all may have a fault, or, on a used car, may have been disabled to hide a problem. Our Vehicle Inspection Checklist includes this check.
What to do when a light comes on
- Note the color and whether it is steady or flashing.
- If it is red or flashing, find a safe place to stop.
- Check your owner’s manual for that symbol.
- Check the obvious: oil level, coolant level (only when cool), tire pressure, gas cap, parking brake.
- Get fault codes read or have the car inspected.
Sources
- Vehicle owner’s manuals and manufacturer warning light guides
- NHTSA, tire pressure monitoring and tire safety guidance (nhtsa.gov/equipment/tires)
This guide is for general information. Warning lights vary by vehicle; always follow your owner’s manual.